VOOPOO PnP Replacement Coils - 5 Pack Wholesale

About the VOOPOO PnP Replacement Coils – 5 Pack

The VOOPOO PnP Replacement Coils are the genuine plug-and-play coil heads behind the DRAG, VINCI, ARGUS and NAVI pod-mod families, sold here in a five-pack. Built on VOOPOO’s PnP platform with a standard press-fit port and a semi-embedded coil design, they swap in about a second without tools and without wasting e-liquid. The range spans nine options from the 0.15 ohm VM6 and TW15 for high-wattage direct-lung vaping down to the 1.2 ohm TR1 for tight, flavor-focused mouth-to-lung draws, so one platform covers every pod in the lineup.

Pick the coil by resistance and wattage. The mesh VM series covers the core range: VM6 0.15 ohm (60-80W), VM5 0.2 ohm (40-60W), VM1 0.3 ohm (32-40W), VM3 0.45 ohm (25-35W) and VM4 0.6 ohm (20-28W) on the original print, moving from full direct-lung down to restricted direct-lung; VOOPOO now also sells these five in a current version printed 55-70W, 40-55W, 28-36W, 25-32W and 18-23W, and says you may receive either, so go by the range printed on your coil. The newer TW mesh coils, TW15 0.15 ohm (55-70W), TW20 0.2 ohm (40-55W) and TW30 0.3 ohm (28-36W), use VOOPOO’s Dual In One double-mesh design, and VOOPOO says the TW15 and TW20 keep their flavor for about 40 mL of e-liquid. The TR1 1.2 ohm regular coil runs at 10-15W for classic MTL. Use free-base e-liquid on the sub-0.45 ohm heads and reserve higher-strength salts for the TR1.

Each pack contains five coils. Every coil uses the same PnP base, so it presses straight into any PnP pod or tank, including the PnP Pod, PnP Pod II and PnP Pod Tank, plus the UFORCE-L tank on the DRAG 4. That means these coils fit the DRAG X and DRAG S, DRAG E60, DRAG H80S and H40, DRAG 4, the full VINCI family (VINCI, VINCI R, VINCI X, VINCI Air), NAVI, ARGUS GT and ARGUS Air, plus the DRAG M100S, ARGUS, ARGUS X, ARGUS Pro, ARGUS GT II, ARGUS XT, ARGUS MT, Doric 60 and SEAL. Pick a coil whose wattage range your device can reach; the 0.15 ohm and 0.2 ohm coils are for devices that deliver 55W or more. Prime each new coil with a few drops of e-liquid and let the pod sit for several minutes before vaping, then stay inside the printed wattage range for the best flavor and coil life.

VOOPOO PnP Replacement Coils Coil Guide:

VM1 0.3Ω: VOOPOO rates it 32-40W, 28-36W on the current print. Restricted direct-lung mesh, VOOPOO’s most widely packed coil, in DRAG X, DRAG S and VINCI kits.
VM6 0.15Ω: VOOPOO rates it 60-80W, 55-70W on the current print. Direct-lung mesh developed for the DRAG X, also packed with ARGUS GT and ARGUS Pro kits.
VM5 0.2Ω: VOOPOO rates it 40-60W, 40-55W on the current print. Direct-lung mesh, packed with DRAG S, ARGUS GT, Doric 60 and DRAG H80S kits.
VM3 0.45Ω: VOOPOO rates it 25-35W, 25-32W on the current print. Restricted direct-lung mesh for nicotine up to 25mg, pre-installed in the DRAG H40 kit.
VM4 0.6Ω: VOOPOO rates it 20-28W, 18-23W on the current print. Restricted direct-lung mesh, the lowest-power VM coil, packed with VINCI, VINCI Air and DRAG E60 kits.
TR1 1.2Ω: VOOPOO rates it 10-15W, one version only. Mouth-to-lung draw, the only MTL coil here, for nicotine up to 35mg, packed with ARGUS and SEAL kits.
TW15 0.15Ω: VOOPOO rates it 55-70W, one version only. Direct-lung double mesh good for 40mL, packed with UFORCE-L tanks in DRAG 4 and ARGUS GT II kits.
TW20 0.2Ω: VOOPOO rates it 40-55W, one version only. Direct-lung double mesh good for 40mL, packed with UFORCE-L tanks in DRAG 4 and ARGUS MT kits.
TW30 0.3Ω: VOOPOO rates it 28-36W, one version only. Restricted direct-lung double mesh, the lowest-power TW coil, packed with DRAG H40, DRAG E60 and VINCI 3 kits.

VOOPOO PnP Replacement Coils Compatible With:

VOOPOO PnP Pod
VOOPOO PnP Pod II
VOOPOO PnP Pod Tank
VOOPOO UFORCE-L Tank
VOOPOO DRAG X
VOOPOO DRAG S
VOOPOO DRAG E60
VOOPOO DRAG H80S
VOOPOO DRAG H40
VOOPOO DRAG 4
VOOPOO VINCI
VOOPOO VINCI R
VOOPOO VINCI X
VOOPOO VINCI Air
VOOPOO NAVI
VOOPOO ARGUS GT
VOOPOO ARGUS Air
VOOPOO DRAG M100S
VOOPOO ARGUS
VOOPOO ARGUS X
VOOPOO ARGUS Pro
VOOPOO ARGUS GT II
VOOPOO ARGUS XT
VOOPOO ARGUS MT
VOOPOO Doric 60
VOOPOO SEAL

VOOPOO PnP Replacement Coils Key Features:

Resistance / Coil Options: VM6 0.15Ω (60-80W original / 55-70W current print, DL); VM5 0.2Ω (40-60W / 40-55W, DL); VM1 0.3Ω (32-40W / 28-36W, RDL/DL); VM3 0.45Ω (25-35W / 25-32W, RDL); VM4 0.6Ω (20-28W / 18-23W, RDL); TW15 0.15Ω (55-70W, DL); TW20 0.2Ω (40-55W, DL); TW30 0.3Ω (28-36W, RDL); TR1 1.2Ω (10-15W, MTL)
Coil Type: Mesh (VM and TW series); regular MTL coil (TR1)
Connection: PnP press-fit plug-and-play base, no threading
Coil Swap: Semi-embedded design, replaces in about one second without tools
Recommended E-Liquid: Free-base for 0.15-0.3Ω coils; higher-strength salts on the 1.2Ω TR1
Pack Quantity: 5 coils per pack
Compatibility: All PnP pods and tanks: PnP Pod, PnP Pod II, PnP Pod Tank, UFORCE-L; DRAG X/S, DRAG E60/H80S/H40, DRAG 4, DRAG M100S, VINCI family, NAVI, ARGUS GT/Air, ARGUS, ARGUS X, ARGUS Pro, ARGUS GT II/XT/MT, Doric 60, SEAL
Shop the full VOOPOO wholesale range

VOOPOO PnP Replacement Coils Purchase Includes:

5 x VOOPOO PnP Replacement Coil

Coil guide

VM6 0.15ΩVOOPOO rates it 60-80W, 55-70W on the current print. Direct-lung mesh developed for the DRAG X, also packed with ARGUS GT and ARGUS Pro kits.

VM5 0.2ΩVOOPOO rates it 40-60W, 40-55W on the current print. Direct-lung mesh, packed with DRAG S, ARGUS GT, Doric 60 and DRAG H80S kits.

VM1 0.3ΩVOOPOO rates it 32-40W, 28-36W on the current print. Restricted direct-lung mesh, VOOPOO's most widely packed coil, in DRAG X, DRAG S and VINCI kits.

VM3 0.45ΩVOOPOO rates it 25-35W, 25-32W on the current print. Restricted direct-lung mesh for nicotine up to 25mg, pre-installed in the DRAG H40 kit.

VM4 0.6ΩVOOPOO rates it 20-28W, 18-23W on the current print. Restricted direct-lung mesh, the lowest-power VM coil, packed with VINCI, VINCI Air and DRAG E60 kits.

TR1 1.2ΩVOOPOO rates it 10-15W, one version only. Mouth-to-lung draw, the only MTL coil here, for nicotine up to 35mg, packed with ARGUS and SEAL kits.

TW15 0.15ΩVOOPOO rates it 55-70W, one version only. Direct-lung double mesh good for 40mL, packed with UFORCE-L tanks in DRAG 4 and ARGUS GT II kits.

TW20 0.2ΩVOOPOO rates it 40-55W, one version only. Direct-lung double mesh good for 40mL, packed with UFORCE-L tanks in DRAG 4 and ARGUS MT kits.

TW30 0.3ΩVOOPOO rates it 28-36W, one version only. Restricted direct-lung double mesh, the lowest-power TW coil, packed with DRAG H40, DRAG E60 and VINCI 3 kits.

Specifications

Brand	VOOPOO
Product Type	Replacement Coils
Model	PnP
Coil	VM6 0.15Ω, VM5 0.2Ω, VM1 0.3Ω, VM3 0.45Ω, VM4 0.6Ω, TR1 1.2Ω, TW15 0.15Ω, TW20 0.2Ω, TW30 0.3Ω
Coil Type	Mesh, Round wire
Connection	Screw-in, Press-fit
Pack Size	5
Compatible Products	VOOPOO PnP Pod, VOOPOO PnP Pod II, VOOPOO PnP Pod Tank, VOOPOO UFORCE-L Tank, VOOPOO DRAG X, VOOPOO DRAG S, VOOPOO DRAG E60, VOOPOO DRAG H80S
SKU	voo-pnp-coils-5pk
Weight	1.4 oz
Dimensions	3.5 × 1 × 3.5 in

VOOPOO PnP Replacement Coils – 5 Pack FAQ

Which VOOPOO devices use PnP coils?

They fit PnP Pod, PnP Pod II, PnP Pod Tank and the UFORCE-L Tank, found on the DRAG X, DRAG S, DRAG E60, DRAG H80S, DRAG H40 and DRAG 4, plus the VINCI family, NAVI and ARGUS. Check the pod name; newer PnP X and TPP pods use different coils.

How do I choose between the nine PnP coil options?

Low-resistance heads suit direct-lung: VM6 0.15Ω and TW15 0.15Ω run roughly 55 to 80W, and VM5 0.2Ω and TW20 0.2Ω run 40 to 60W. VM1 0.3Ω, TW30 0.3Ω, VM3 0.45Ω and VM4 0.6Ω are restricted lung, and TR1 1.2Ω at 10 to 15W is mouth-to-lung.

How many coils per pack and how long do they last?

Five coils per pack in one resistance. A coil typically lasts one to two weeks of regular use, so a pack carries a customer for several weeks to a couple of months. With nine options, a good starting stock is VM1 0.3Ω, VM5 0.2Ω and VM4 0.6Ω.

Are there newer VOOPOO coil families?

Yes. The PnP X coils are the fourth-generation heads for PnP X cartridges and UFORCE-X tanks, and the TPP coils fit TPP pods. They do not interchange with the original PnP coil, so sell by pod name, and ask which device the customer owns if they are unsure which pod generation they have.

Where do these VOOPOO packs come from?

Directly from authorized channels. As an authorized master distributor we never buy on the grey market, so each pack arrives in original VOOPOO packaging for you to resell with confidence. The VOOPOO brand page lists every VOOPOO item we carry, which is handy when a customer needs the matching tank or pod too.

Can I order a single pack of VOOPOO PnP Replacement Coils?

Yes. There is no minimum order, so you can start with one pack or stock a full resistance range, and price breaks are calculated on total cart quantity. In-stock orders ship within 1 business day from our Oklahoma City and Florida warehouses with PACT Act compliant adult-signature delivery. Accounts are approved normally within one business day, and new accounts get $25 off the first order.

STOCK THESE TOO

Round out your order

View all replacement coils →

WHO WE ARE

Wholesale vape distributor for licensed US retailers

eJuice Resellers Wholesale is an authorized master distributor and B2B vape supplier to licensed vape shops, smoke shops, convenience stores and sub-distributors across the United States. One wholesale account covers the whole catalog: disposable vapes from Geek Bar, RAZ, Lost Mary and Fifty Bar, e-liquids in freebase and salt nicotine, vape hardware, coils and pods from SMOK, Vaporesso, Geekvape and UWELL, and nicotine pouches.

Every product is sourced direct through authorized channels, sold by the unit with volume price breaks and no minimum order, and ships within 1-2 business days from our Oklahoma City and Florida warehouses, PACT Act compliant with adult-signature delivery. Apply for a wholesale account and get $25 off your first order.

3,200+RETAILERS

9,663SKUS

13yrsEXPERIENCE

BRANDS WE CARRY