About the SMOK RPM 4 Replacement Coils – 5 Pack
SMOK RPM 4 Replacement Coils are sold in packs of five and cover two SMOK coil series: the RPM 4 coils that SMOK lists for the Nord 6 Empty Pod (Top-Fill), and the LP2 coil that comes pre-installed in the LP2 pod of the SMOK RPM 4 kit. Three options are available: the RPM 4 Mesh 0.15Ω coil, rated for 30-60W; the RPM 4 Mesh 0.6Ω coil, rated for 10-30W; and the LP2 Meshed 0.23Ω coil, rated for 20-45W and delivering a smooth direct-lung hit. Every coil uses a mesh heating element for fast ramp-up, even heating and consistent flavor from the first puff to the last.
Installation is press-fit: pull the spent coil straight out of the bottom of the pod, seat a fresh coil, and let it saturate for several minutes before vaping. The RPM 4 Mesh coils use a dual O-ring seal, while the LP2 coil uses a triple silicone-ring seal, both designed to keep e-liquid in the pod and out of the device. The 0.15Ω coil runs at higher wattage, the 0.6Ω coil runs at lower power, and the 0.23Ω LP2 coil sits in between for warm, airy draws.
Pod fitment matters with this range. SMOK lists the RPM 4 Mesh 0.15Ω and 0.6Ω coils for the Nord 6 Empty Pod (Top-Fill, 5 mL) of the SMOK Nord 6 kit. SMOK does not list them for the RPM 4 kit, whose RPM 4 RPM pod takes SMOK’s standard RPM-series coils. The Nord 6 side-fill 0.4Ω pod has a fixed coil that cannot be replaced. The LP2 Meshed 0.23Ω coil fits the RPM 4 LP2 pod (5 mL) and the LP2 pods of the SMOK Nord 50W, G-Priv Pod, G-Priv Pro Pod, Morph Pod-80 and Morph S Pod-80 kits. Each pack contains five coils of a single resistance, so choose the option that matches your pod and preferred draw.
SMOK RPM 4 Replacement Coils Coil Guide:
- Meshed 0.15Ω (Nord 6): SMOK rates it 30-60W, best at 50W. Higher-power coil for the Nord 6 top-fill pod, not listed by SMOK for the RPM 4 kit.
- LP2 Meshed 0.23Ω: SMOK rates it 20-45W. Direct-lung draw. LP2 series coil, pre-installed in the LP2 pod of the RPM 4 and Nord 50W kits.
- Meshed 0.6Ω (Nord 6): SMOK rates it 10-30W, best at 28W. Lower-power coil for the Nord 6 top-fill pod, not listed by SMOK for the RPM 4 kit.
SMOK RPM 4 Replacement Coils Compatible With:
- SMOK Nord 6 Kit / Nord 6 Empty Pod (Top-Fill) – Mesh 0.15Ω / Mesh 0.6Ω
- SMOK RPM 4 Kit (RPM 4 LP2 pod) – LP2 Meshed 0.23Ω
- SMOK Nord 50W Kit (LP2 pod) – LP2 Meshed 0.23Ω
- SMOK G-Priv Pod Kit (LP2 pod) – LP2 Meshed 0.23Ω
- SMOK G-Priv Pro Pod Kit (LP2 pod) – LP2 Meshed 0.23Ω
- SMOK Morph Pod-80 Kit – LP2 Meshed 0.23Ω
- SMOK Morph S Pod-80 Kit – LP2 Meshed 0.23Ω
SMOK RPM 4 Replacement Coils Key Features:
- Pod Capacity: Nord 6 Empty Pod (Top-Fill) 5 mL / RPM 4 LP2 pod 5 mL
- Resistance / Coil Options: Mesh 0.15Ω (30-60W) · LP2 Meshed 0.23Ω (20-45W, DTL) · Mesh 0.6Ω (10-30W)
- Coil Type: Mesh heating element, fast ramp-up
- Seal: Dual O-ring (RPM 4 Mesh) / triple silicone ring (LP2)
- Fill System: Top-fill pod (RPM 4 Mesh) / side-fill pod (LP2), bottom press-fit coil
- Connection: Press-fit (plug-in)
- Pack Quantity: 5 coils per pack, single resistance
- Compatibility: 0.15Ω / 0.6Ω: Nord 6 Empty Pod (Top-Fill) · 0.23Ω LP2: RPM 4 LP2 pod and the LP2 pods of the Nord 50W, G-Priv Pod, G-Priv Pro Pod, Morph Pod-80 and Morph S Pod-80
- Shop the full SMOK wholesale range
SMOK RPM 4 Replacement Coils Purchase Includes:
- 5 x SMOK RPM 4 Replacement Coil
