About the Horizon Falcon Replacement Coils – 3 Pack
The Horizon Falcon Replacement Coils are genuine mesh coil heads for HorizonTech’s Falcon sub-ohm tank family, sold three to a pack. Each head pairs a mesh heating element with HorizonTech’s stated wicking: cotton and wood pulp on the M1, M2 and M3 (M-Triple), bamboo fiber on the M1+, and bamboo pulp cotton on the M6 and M8. The wide mesh surface heats evenly and quickly for the dense clouds and saturated flavor the Falcon line is known for, while the fibrous wicking keeps up with the high-VG e-liquids these low-resistance heads are built to run.
This listing covers six mesh options so you can match the coil to your tank and preferred output. The M1 Mesh (0.15Ω) runs best around 70W, the M1+ Mesh (0.16Ω) uses a bamboo-fiber wick tuned for roughly 75W, and the M2 Mesh (0.16Ω) is rated 70-80W. The M3 Mesh (0.15Ω) is Horizon’s M-Triple triple-mesh head rated 80-85W for maximum vapor, while the newer M6 (0.15Ω) and M8 (0.15Ω) use six- and eight-strip parallel integrated mesh structures that spread heat across more surface for fuller, softer vapor and longer coil life, both dialed in around 65-70W.
Installation is a screw-in swap: unscrew the tank base, unscrew the old coil, screw the new head in, and prime the wicking ports with a few drops of e-liquid before filling. Let a freshly installed coil sit saturated for several minutes and start at the low end of its wattage range to avoid dry hits and extend its life. HorizonTech lists the Falcon Legend for all six coils; fit of the M6 and M8 in the older Falcon and Falcon King, and in the Falcon Resin tanks, is retailer-listed.
Horizon Falcon Replacement Coils Coil Guide:
- M1 Mesh 0.15Ω: HorizonTech rates it 70-80W, with 70W engraved on the coil. Single mesh, cotton and wood pulp wick, the coil that launched the Falcon tank.
- M1+ Mesh 0.16Ω: HorizonTech rates it 75W, a single figure. Single mesh with a bamboo fiber wick, released with the Falcon King tank.
- M2 Mesh 0.16Ω: HorizonTech rates it 70-80W. Single mesh pierced with round holes, cotton and wood pulp wick, the same rating as the M1.
- M3 Mesh 0.15Ω: HorizonTech rates it 80-85W. Three mesh coils in one head, named M-Triple by HorizonTech, the highest wattage option here.
- M6 Mesh 0.15Ω: HorizonTech rates it 65-70W. Six parallel mesh strips, bamboo pulp cotton wick, pitched as the smoother of the Legend pair and its spare coil.
- M8 Mesh 0.15Ω: HorizonTech rates it 65-70W. Eight parallel mesh strips, bamboo pulp cotton wick, pitched as the bigger vapor coil, pre-installed in the Falcon Legend.
Horizon Falcon Replacement Coils Compatible With:
- Horizon Falcon Sub-Ohm Tank (M6 and M8 fit retailer-listed)
- Horizon Falcon King (M6 and M8 fit retailer-listed)
- Horizon Falcon Resin / Falcon Resin Artisan (retailer-listed)
- Horizon Falcon Legend (M6 and M8 coils were introduced with the Falcon Legend, which accepts all Falcon M- and F-series coils)
Horizon Falcon Replacement Coils Key Features:
- Coil type: Genuine HorizonTech Falcon mesh replacement coil heads (3-pack)
- Mesh options: M1 0.15Ω, M1+ 0.16Ω, M2 0.16Ω, M3 (M-Triple) 0.15Ω, M6 0.15Ω, M8 0.15Ω
- M1 Mesh (0.15Ω): Wood pulp + cotton wick; best around 70W
- M1+ Mesh (0.16Ω): Bamboo-fiber wick; recommended around 75W
- M2 Mesh (0.16Ω): Wood pulp + cotton wick; 70-80W
- M3 M-Triple Mesh (0.15Ω): Triple-mesh element for maximum vapor, 80-85W
- M6 / M8 Mesh (0.15Ω): Six- and eight-strip parallel integrated mesh for fuller, softer vapor and longer life, 65-70W
- Wicking: Cotton and wood pulp (M1, M2, M3 M-Triple); bamboo fiber (M1+); bamboo pulp cotton (M6, M8)
- Shop the full HorizonTech wholesale range
Horizon Falcon Replacement Coils Purchase Includes:
- 1 x Horizon Falcon Replacement Coils
